Brief introduction of SUS410 stainless steel:
SUS410 is a nickel-free stainless steel. It is a martensitic stainless steel with good hardenability. It has high hardness, toughness, good corrosion resistance, heat strength and cold deformation properties, and good shock absorption. High temperature or low temperature tempering is required, but tempering between 370-560 ° C should be avoided. Mostly used to manufacture parts that are resistant to corrosion by the atmosphere, water vapor, water and oxidizing acids.
If you have enquiry for SUS410 under JIS G4304 or 410 under ASME SA240, please feel free to let us know your information, we have stock cargo and roll freshly of this steel grade plates, the specification we offer as following:
Stainless steel sheet and plate
SUS410 stainless sheet and coil specification:
Thickness: 1mm-6mm
Width: 500mm-2500mm(cut according to customer’s request)
Length: 500mm-12000mm or coil
Process: HR, CR
Minimum order: 100kg
SUS410 stainless plate specification:
Thickness: 6mm-200mm
Width: 500mm-4200mm
Length: 500mm-12000mm
Process: Hot Rolled
Minimum order:1 piece
Chemical composition:
JIS G4304 |
Elements % |
||||||||
C≤ |
Mn≤ |
P ≤ |
S ≤ |
Si≤ |
Cr |
Ni |
Mo |
Al |
|
SUS410 stainless steel plate |
0.15 |
1.0 |
0.040 |
0.030 |
1.0 |
11.50-13.50 |
|
Stainless steel plate SUS410 Mechanical Properties:
Tensile Strength, MPa |
Yield Strength, MPa |
Elongation, % |
Hardness, HRB |
440min |
205min |
20 min |
93 max |